The Wasp is a small flying wing with excellent performance. Designed around an inexpensive CD-ROM brushless outrunner motor, this little plane will impress you and your fellow RC-pilots with it´s speed and it´s ability to accelerate vertically.
The Wasp is easy to fly and it´s a pleasure to cruise around at 1/3 throttle. But when you increase the throttle The Wasp turns into a fast little screamer. The clean aerodynamic lines of the plane and the High Performance MH wingprofile ensures that you get the most from the motors output. Even when you shut off the motor and let the plane dive, it picks up speed very quickly thanks to the small aerodynamic shape. Launching the plane is very easy and done with 1/3 to 1/2 throttle. Landings are just as easy.
The Wasp will do all the basic aerobatic manuevers that doesn´t require rudder. But the most impressive ones are huge loops, multiple quickrolls, fast lowlevel fly-by´s and going straight up while rolling until the plane is just a little speck in the sky.
The Wasp is delivered as a kit with precision lasercut quality Andino balsa and plywood. The fuselage is vacuumformed and supported by the internal structure. The Wasp incorporates some unique designfeatures that makes the model very light and strong. Also included in the kit are several extra tools to help with balancing the model and adjusting the control throws.
The Wasp is easy to fly and it´s a pleasure to cruise around at 1/3 throttle. But when you increase the throttle The Wasp turns into a fast little screamer. The clean aerodynamic lines of the plane and the High Performance MH wingprofile ensures that you get the most from the motors output. Even when you shut off the motor and let the plane dive, it picks up speed very quickly thanks to the small aerodynamic shape. Launching the plane is very easy and done with 1/3 to 1/2 throttle. Landings are just as easy.
The Wasp will do all the basic aerobatic manuevers that doesn´t require rudder. But the most impressive ones are huge loops, multiple quickrolls, fast lowlevel fly-by´s and going straight up while rolling until the plane is just a little speck in the sky.
The Wasp is delivered as a kit with precision lasercut quality Andino balsa and plywood. The fuselage is vacuumformed and supported by the internal structure. The Wasp incorporates some unique designfeatures that makes the model very light and strong. Also included in the kit are several extra tools to help with balancing the model and adjusting the control throws.
Specifications:
Wingspan
Length
Weight (ready to fly)
Recommended equipment:
2 - micro sevos or smaller
1 - Micro receiver
1 - Brushless 10 A ESC
1 - Brushless CD-ROM outrunner motor or similar
1 - Li-Po 3S1P 20C 360 mAh Battery
1 - CAM Speed Prop, 12 - 12 / 4.7 - 4.7
The model in the videos is equipped with the following:
2 - GWS Naro micro servo, 9 g
1 - Jeti REX 5 plus receiver
1 - Castle Creations Phoenix-10 ESC
1 - GoBrushless.com GBv1.1 CD-ROM motor, 12 turns
1 - Kokam 3S1P 20C 360 mAh LiPo Battery
1 - CAM Speed Prop, 12 - 12 / 4.7 - 4.7
Wingspan
Length
Weight (ready to fly)
Recommended equipment:
2 - micro sevos or smaller
1 - Micro receiver
1 - Brushless 10 A ESC
1 - Brushless CD-ROM outrunner motor or similar
1 - Li-Po 3S1P 20C 360 mAh Battery
1 - CAM Speed Prop, 12 - 12 / 4.7 - 4.7
The model in the videos is equipped with the following:
2 - GWS Naro micro servo, 9 g
1 - Jeti REX 5 plus receiver
1 - Castle Creations Phoenix-10 ESC
1 - GoBrushless.com GBv1.1 CD-ROM motor, 12 turns
1 - Kokam 3S1P 20C 360 mAh LiPo Battery
1 - CAM Speed Prop, 12 - 12 / 4.7 - 4.7
70 cm / 28"
30 cm / 12"
180 g / 6.3 oz.
30 cm / 12"
180 g / 6.3 oz.
Copyright © 2006 Hammer Models. All rights reserved.
Price: 49.99 USD (52 Euro)
Shipping worldwide: 10 USD (8 Euro)
Shipping worldwide: 10 USD (8 Euro)
It is truly amazing how simple you have this kit designed
to go together and how well the parts fit...
So far I'm loving the engineering of this Kit.
Paul Viscovich, CA, USA
There is plenty of speed in this little plane.
Kenneth Due, Denmark
This little wing is fast and gets small fast.. It climbs like a rocket strait up and gets too small to see real fast...
Paul Viscovich, CA, USA
to go together and how well the parts fit...
So far I'm loving the engineering of this Kit.
Paul Viscovich, CA, USA
There is plenty of speed in this little plane.
Kenneth Due, Denmark
This little wing is fast and gets small fast.. It climbs like a rocket strait up and gets too small to see real fast...
Paul Viscovich, CA, USA
Wasp build thread
